System:beeper[:State] <B - Keithley SourceMeter 2790 Reference Manual

Hide thumbs Also See for SourceMeter 2790:

Table of Contents

Model 2790 SourceMeter

This command is used to simulate front panel key presses. For example, to select the volts

measurement function, send the following command to simulate pressing the "DCV" key:

SYSTem:KEY 2. The key-press codes are also shown in

The :KEY? command returns the key code for the last "pressed" key using the :KEY

<NRf> command. It does not return the last key actually pressed by the operator.

SYSTem:BEEPer[:STATe] <b>

You can disable the beeper for limits and continuity tests. However, when limits or CONT

is again selected, the beeper will automatically enable.

Key-press codes

Switch System Reference Manual

MATH O U T P U T

Disable beeper

Enable beeper

Model 2790 SourceMeter Switch System

PERIOD SENSOR