Model 2790 SourceMeter® Switch System Reference Manual
:SAVE
(:CALibration:PROTected:CARD1:SAVE)
Purpose
Format
Parameters
Description
klqb
Example
To save calibration constants in card EEROM after the calibration
procedure.
:cal:prot:card1:save
None
The :SAVE command stores calculated calibration constants derived
during Model 7751/7752/7753 calibration in card EEROM. (EEROM is
non-volatile memory.) Calibration constants will be retained indefinitely
once saved. Generally, :SAVE is sent after all other calibration steps
(except for :LOCK).
Card calibration will be only temporary unless the :SAVE command is sent to
permanently store calibration constants.
:CAL:PROT:CARD1:SAVE
Save card calibration constants.
G-21