Table of Contents
Advertisement
9-12
5.
6.
7.
8.
Scanning
While limits can be configured on a per scan channel basis, the digital output configura-
tion cannot. Therefore, for all scan channels that are set to use limits, the digital output
will function according to how the Model 2790 is set up when the scan is run.
Use the
key to display the present logic sense (LSENSE) setting: HIGH or
LOW.
If you want to retain the present logic sense setting, proceed to step 7. Otherwise,
press
to move the cursor to the right, press the
or "LOW," and press ENTER.
Use the
key to display the present PULSE mode setting: NO or YES.
To retain the present pulse mode setting, press ENTER. Otherwise, press
move the cursor to the right, press the
and press ENTER.
®
2790 SourceMeter
Switch System Reference Manual
or
or
key to display "NO" or "YES,"
key to display "HIGH"
to
Advertisement
Table of Contents
