Table of Contents
Advertisement
5-16
IEEE-488 Operation
SYSTem subsystem
The system subsystem contains miscellaneous commands and are summarized
in
Table
Table 5-6
SYSTem command summary
Command
:SYSTem
:PRESet
:POSetup <name>
:POSetup?
:VERSion?
:ERRor?
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to be
included in the program message. Do not use brackets ([ ]) in the program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the pro-
gram message.
3. Upper case characters indicate the short-form version for each command word.
4. At least one space is required between a command word and the parameter.
Trigger subsystem
The Trigger Subsystem is made up of a series of commands and subsystems to
configure the three layers of the Trigger Model (see
These commands and subsystems are summarized in
Front panel operation and IEEE-488 operation use different nomenclature for the
three layers of the Trigger Model and is summarized as follows:
Layer
First layer
Second layer
Third layer
5-6.
Return to :SYST:PRES defaults.
Select power-on setup: RST, PRESet, SAV0-SAV9.
Query power-on setup.
Query revision level of SCPI standard.
Query Error Queue.
Trigger Model Layer Nomenclature:
Layer Name; Front Layer Name; IEEE-488
Panel Operation
Arm Layer
Scan Layer
Channel Layer
Return to
Description
Figure 5-4 on page
Bus Operation
Arm Layer 1
Arm Layer 2
Trigger Layer
Section 5 topics
Model 7002-HD User's Manual
5-7).
Table
5-7.
Advertisement
Table of Contents
