Keithley SourceMeter 2790 Reference Manual page 373

Hide thumbs Also See for SourceMeter 2790:

Table of Contents

Table 15-5 (cont.)

SENSe command summary

:APERture <NRf>

:APERture? [<clist>]

:DIGits <n> [, <clist>]

:DIGits? [<clist>]

:REFerence <n> [, <clist>]

:STATe <b> [, <clist>]

:STATe? [<clist>]

:ACQuire [, <clist>]

:REFerence? [<clist>]

:RANGe <n> [, <clist>]

:RANGe? [<clist>]

:THReshold <NRf>

1. CAVerage:DELay and RATio:DELay are coupled. Changing the delay for channel average also changes the delay for channel

ratio and vice versa.

2. For 60Hz line power, the default for aperture is 16.67msec. For 50Hz, the default is 20msec.

3. REPeat is the *RST default and MOVing is the SYSTem:PRESet default. From the front panel, the factory default is MOVing.

4. OFF is the *RST default and ON is the SYTem:PRESet default.

Model 2790 SourceMeter

Path to configure period:

Sets gate time for period measurements in

seconds (0.01 to 1.0).

Query period gate time.

Specify measurement resolution (4 to 7).

Query resolution.

Specify reference (0 to 1).

Enable or disable reference.

Query state of reference.

Use input signal as reference.

Query reference value.

Path to select the threshold voltage range:

Select threshold range (0 to 1010).

Query threshold range.

Path to configure continuity test:

Set threshold resistance in ohms

(1 to 1000).

Query threshold resistance.

Switch System Reference Manual