Table of Contents
Advertisement
15-22
Table 15-8 (cont.)
SYSTem command summary
Command
SYSTem
:CARDX
:ACHannel
[:STARt]?
:END?
:AOUTput
[:STARt]?
:END?
:DOUTput
[:STARt]?
:END?
:ICHannel?
[:STARt]?
:END?
:TCHannel?
:DINPut
[:STARt]?
:END?
:SNOpen?
:BANKs?
:SWOpen?
:BANKs?
:CSOhms?
Model 2790 SourceMeter
Description
Path to query amps channels
Request lowest numbered amps channel;
0 = amps measurements not supported.
Request highest numbered amps channel;
0 = amps measurements not supported.
Path to query analog output channels
Request lowest numbered analog output
channel; 0 = analog output not supported.
Request highest numbered analog output
channel; 0 = analog output not supported.
Path to query digital output channels
Request lowest numbered digital output
channel; 0 = digital output not supported.
Request highest numbered digital output
channel; 0 = digital output not supported.
Path to query isolated channels
Request lowest numbered isolated channel;
0 = isolated channels not supported.
Request highest numbered isolated channel;
0 = isolated channels not supported.
Query the totalizer channel.
Path to query digital input channels
Request lowest numbered digital input port;
0 = digital input not supported.
Request highest numbered digital output
channel; 0 = digital input not supported.
Query whether card is "single no-open" type
(i.e., 7711); 1 = yes, 0 = no.
For "single no-open"card, query number of
banks. If not "single no-open" type, error -221
(settings conflict) results.
Query whether card is "single with-open" type
3
(1 = yes, 0 = no)
.
For "single with-open"card, query number of
banks.
Query whether card supports common-side 4-wire
3
ohms
.
®
Switch System Reference Manual
3
:
3
:
3
:
3
:
3
:
Default
parameter
Ref
SCPI
Advertisement
Table of Contents
