Table of Contents
Advertisement
15-4
Table 15-1 (cont.)
CALCulate command summary
Command
CALCulate2
:FORMat <name>
:FORMat?
:STATe <b>
:STATe?
:IMMediate
:IMMediate?
:DATA?
CALCulate3
:MLIMit
:LATChed <b>
:OUTPut
[:STATe] <b>
[:STATe]?
:PULSe
[:STATe] <b>
[:STATe]?
:TIME <NRf>
:TIME?
:LSENse <name>
:LSENse?
:LIMit1
:UPPer
[:DATA] <n>
[, <clist>]
[:DATA]? [<clist>]
:LOWer
[:DATA] <n>
[, <clist>]
[:DATA]? [<clist>]
:STATe <b>
[, <clist>]
:STATe? [<clist>]
:FAIL?
Model 2790 SourceMeter
Description
Subsystem to control CALC 2:
Select math format: (MEAN, SDEViation,
MAXimum, MINimum, PKPK, or NONE).
Query math format.
Enable or disable calculation.
Query state of math function.
Recalculate raw input data in buffer.
Perform calculation and read result.
Read math result of CALC 2.
Subsystem to control CALC 3 (limit test):
Path for master limit command:
Enable or disable master limit latch.
Path for limit output commands:
Enable or disable limit outputs.
Query state of limit outputs.
Path to control limit output pulsing:
Enable or disable limit output pulsing.
Query state of limit output pulsing.
Set output pulse time in sec (0.001 to
99999.999).
Query output pulse time.
Set logic sense of all limit lines (AHIGh or
ALOW).
Query logic sense of limit lines.
Path to control LIMIT 1 test:
Path to configure upper limit:
Set upper limit (-4294967295 to
+4294967295).
Query upper limit.
Path to configure lower limit:
Set lower limit (-4294967295 to
+4294967295).
Query lower limit.
Enable or disable limit test.
Query state of limit test.
Query test result (1 = failing).
®
Switch System Reference Manual
Default
parameter
Ref
Sec 6
NONE
(Note 4)
Sec 9
OFF
OFF
OFF
0.002
AHIGh
1
-1
OFF
SCPI
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Advertisement
Table of Contents
