Remote Programming For Basic Measurements; Basic Measurement Commands - Keithley SourceMeter 2790 Reference Manual

3-32

Remote programming for basic measurements

Basic measurement commands

klqb
Commands to perform basic measurements are listed in
Table 3-5
Basic measurement commands
Commands
Select measurement function
[SENSe[1]]
:FUNCtion <name> [, <clist>]
DCV function
[SENSe[1]]
:VOLTage[:DC]:IDIVider <b>
Ω4 function
[SENSe[1]]
:FRESistance:OCOMpensated <b>
[, <clist>]
*Refer to the paragraphs following this table for more information.
Model 2790 SourceMeter
When measurements are performed, the readings are fed to other enabled pro-
cessing operations. Appendix C
the commands used to return the various processed readings.
1
Optional root command.
Select measurement function:
Optional root command.
Enable/disable DCV input divider;
Optional root command.
Enable/disable offset-compensated ohms. OFF
explains "Data flow (remote operation)"
Table
Description
<name> = 'VOLTage[:DC]',
'VOLTage:AC', 'CURRent[:DC]',
'CURRent:AC', 'RESistance',
'FRESistance', 'TEMPerature,'
'CONTinuity', 'FREQuency', or
'PERiod'.
Note: [:DC] is optional.
<b> = ON or OFF.
®
Swich System Reference Manual
3-5.
Default Ref
VOLT
OFF
and
a*
b*