Table of Contents
Advertisement
Model 2790 SourceMeter
Figure 2-11
CARD menu tree
SLOT1: 77XX
7751
7752
I-C27:01.00 mA
7753
7751
V-C28:050.0 V
7753
*7753 should be installed in slot 1 for rated accuracy.
CARD: VIEW — This menu item is used to view all channels that are presently closed.
The channels are built into a string that scrolls the display. Four dots identify the end of the
string. Model 7751 example (Slot 1) — Assume the following string is scrolling across the
display:
101, 114, 118 . . . .
The above scrolling string identifies the 7751 channels closed to connect channel 1 to the
DMM. The complete simplified schematic of the 7751/7752/7753 is shown in
SLOTX: 77xx — Use to scroll the closed channels for the switching module in Slot X
(where X = 1 or 2).
Scrolling speed — The scrolling speed of the channel string is adjustable or can be
paused. The
key pauses scrolling. Press ENTER a second time to resume scrolling.
Exiting VIEW — To exit from VIEW, press the EXIT key. Pressing an instrument setting
key will also exit VIEW, but it will also perform the operation associated with the key. For
example, pressing Ω2 will exit VIEW and select the Ω2 function.
klqb
®
Switch System Reference Manual
CONFIG
SLOT2: 77XX
I-C27:01.00 mA
V-C28:050.0 V
key slows down scrolling speed and the
When a command is received while the display is scrolling, the instrument exits
from the CARD menu and the command is executed.
SHIFT
CARD
SLOT1: 77XX
7751
Scrolls
7752
Channels
7753*
7751
77XX = Model number of installed
7753*
switching module.
VIEW
SLOT2: 77XX
Scrolls
Channels
Figure
key speeds it up. The ENTER
2-27
2-12.
Advertisement
Table of Contents
