Table of Contents
Advertisement
Model 2790 SourceMeter® Switch System Reference Manual
Table 15-5 (cont.)
SENSe command summary
Command
[SENSe[1]]
:TEMPerature
:THERmistor
[:TYPE] <NRf>
[, <clist>]
[:TYPE]? [<clist>]
:FRTD
:TYPE <name>
[, <clist>]
:TYPE? [<clist>]
:RZERo <NRf>
[, <clist>]
:RZERo? [<clist>]
:ALPHa <NRf>
[, <clist>]
:ALPHa? [<clist>]
:BETA <NRf> [, <clist>]
:BETA? [<clist>]
:DELTa <NRf>
[, <clist>]
:DELTa? [<clist>]
:FREQuency
:APERture <NRf>
[, <clist>]
:APERture? [<clist>]
:DIGits <n> [, <clist>]
:DIGits? [<clist>]
:REFerence <n> [, <clist>]
:STATe <b> [, <clist>]
:STATe? [<clist>]
:ACQuire [, <clist>]
:REFerence? [<clist>]
:THReshold
:VOLTage
:RANGe <n> [, <clist>]
:RANGe? [<clist>]
7702 <clist> = (@SCH), where: S = Mainframe slot number (1 or 2) and CH = Switching module channel number.
7751/7752/7753 <clist> (DCV, Ω2, Ω4) = (@Mn) (see
Description
Path to configure thermistor:
Set thermistor type in ohms (1950 to
10050).
Query thermistor type.
Path to configure 4-wire RTD:
Select FRTD type (PT100, D100, F100,
PT3916, PT385, or USER).
Query FRTD type.
Specify constant for USER type (0 to
10000).
Query rzero.
Specify constant for USER type (0 to
0.01).
Query alpha.
Specify constant for USER type (0 to
1.00).
Query beta.
Specify constant for USER type (0 to
5.00).
Query delta.
Path to configure frequency.
Sets gate time for frequency
measurements in seconds (0.01 to 1.0).
Query frequency gate time.
Specify measurement resolution (4 to 7).
Query resolution.
Specify reference (0 to 1.5e7).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Path to select the threshold voltage range:
Select threshold range (0 to 1010).
Query threshold range.
"Memory patterns," page
Default
parameter
5000
PT100
100
0.00385
0.111
1.507
1.0
7
0
OFF
10
2-36).
15-17
Ref
SCPI
Sec 3
Sec 3
Sec 3
Sec 4
Sec 5
✓
Sec 3
✓
Advertisement
Table of Contents
