Table of Contents
Advertisement
4-6
Digits
The DIGITS key sets display resolution for the Model 2790 from 3 to 6 digits. From the
front panel, setting digits for one function affects all the other functions. For example if
you set DCV for 3 digits, the other functions will also set to 3 digits. For remote pro-
gramming, each mainframe input function can have its own unique digits setting.
Digits has no effect on the remote reading format. The number of displayed digits does not
affect accuracy or speed. Speed is set by the RATE key.
Setting display resolution — To set display resolution, press the DIGITS key until the
desired number of digits is displayed.
Scanning (7702 only)
When a simple scan using a 7702 module is configured, the present digits setting will
apply to all channels in the scan. When an advanced scan is configured, each channel can
have its own unique digits setting. Details to configure and run a scan are provided in
Section
For remote programming, the <clist> parameter is used to configure channels for a scan.
Remote programming — digits
Digits commands
The commands to control display resolution (digits) are listed in
information on these commands follow the table.
klqb
7.
Query commands are not included in
subsystem are provided in
Model 2790 SourceMeter
Table
4-3. All commands for the SENSe
Table
15-5.
®
Switch System Reference Manual
Table
4-3. Additional
Advertisement
Table of Contents
