Keithley SourceMeter 2790 Reference Manual page 103

Hide thumbs Also See for SourceMeter 2790:

Table of Contents

Table 2-5 (cont.)

Command sequence for memory patterns test example

Command sequence

:FORM:ELEM READ

Note: Nine values will be returned in a single string with comma separators between the values. The string

will have to be parsed to obtain the individual readings. The inspection process can actually be automated by

assigning limits to the memory locations. Doing so enables the instrument to identify Pass/Fail conditions

during the scan. The instrument can also be configured to generate digital outputs in response to these

Model 2790 SourceMeter

Send READINGS only when data is requested.

Since this is same as specified in the Initial Setup,

this command can be left out.

Request data stored in buffer. Enter the readings and

inspect the values – take action as required.

Restore Sample Count to 1 for normal (non-scanning)

Switch System Reference Manual