Remote Programming - Default And User Setups - Keithley SourceMeter 2790 Reference Manual

Model 2790 SourceMeter
Table 1-4 (cont.)
Default settings
Setting
Voltage (AC and DC)
dB
Reference
Digits (AC)
Digits (DC)
Filter
Window
Count
Type
Range
Rate (DC)
Rel
Remote programming — default and user setups
Default and user setup commands are listed in
klqb
Table 1-5
Default setup commands
SYSTem:PRESet
*RST
*SAV <NRf>
*RCL <NRf>
SYSTem:POSetup <name> Specify power-on setup; <name> = RST, PRESet.
Programming example
*SAV 2
SYST:POS RST
*RST
*RCL 2
®
Switch System Reference Manual
Off
1.0
5 digits
6 digits
On
0.1%
10
Moving
Auto
Slow (5 PLC)
Off
The SYSTem:PRESet and *RST defaults are listed in the SCPI tables in
Section 15.
Commands
' Save present setup in memory location 2.
' Specify *RST setup as the power-on setup.
' Return 2790 to RST defaults.
' Return 2790 to setup stored in memory location 2.
Factory
Off
1.0
5 digits
6 digits
Off
0.1%
10
Repeat
Auto
Slow (5 PLC)
Off
Table 1-5.
Description
Restore SYSTem:PRESet defaults.
Restore *RST defaults.
Save settings as user setup; <NRf> = 0, 1, 2, or 3.
Restore user saved setup; <NRf> = 0, 1, 2, or 3.
*RST Set Diff
✓
✓
1-23