Table of Contents
Advertisement
Model 2790 SourceMeter Switch System Reference Manual
To allow many parallel connections to one instrument, stack the connectors. Two screws
are located on each connector to ensure that connections remain secure. Present standards
call for metric threads, which are identified with dark-colored screws. Earlier versions
have different screws, which are silver-colored. Do not use these types of connectors on
the Model 2790; it is designed for metric threads.
Figure 10-2
To avoid possible mechanical damage, stack no more than three connectors on any one
unit.
klqb
shows a typical connecting scheme for a multi-unit test system.
Figure 10-2
IEEE-488 connections
Instrument
To minimize interference caused by electromagnetic radiation, use only shielded
IEEE-488 cables. Available shielded cables from Keithley are Models 7007-1
and 7007-2.
Instrument
Instrument
Controller
10-5
Advertisement
Table of Contents
