5 Parameter Setting and Functions
Parameter
Digit
No.
0
1
Pn512
2
3
0
1
Pn517
2
3
Pn522
–
∗
/S-ON, P-OT, N-OT, /ALM-RST, /DEC, /RGRT are allocated to each terminal in a fixed manner.
For the connector terminal layout, refer to Chapter 3.
5-4
Description
Output Signal Inversion
Σ-V Series:
CN1-1 or -2 terminals
Large-Capacity Σ-V Series:
CN1-25 or -26 terminals
Output Signal Inversion
Σ-V Series:
CN1-23 or -24 terminals
Large-Capacity Σ-V Series:
CN1-27 or -28 terminals
Output Signal Inversion
Σ-V Series:
CN1-25 or -26 terminals
Large-Capacity Σ-V Series:
CN1-29 or -30 terminals
Reserved (Do not change.)
ALO1 Output Signal Mapping
ALO2 Output Signal Mapping
ALO3 Output Signal Mapping
Reserved (Do not change.)
Positioning Completed Width
Setting
The INDEXER Module sets a value matched to
0 or 1
PnB1C and PnB51.
The INDEXER Module sets a value matched to
0 or 1
PnB1D and PnB51.
The INDEXER Module sets a value matched to
0 or 1
PnB1E and PnB51.
0
–
0 or 1
0 or 2
The INDEXER Module sets a value matched to
PnB51.
0 or 3
0
The INDEXER Module sets a value matched to
0 to 99999
PnB2D.
(cont'd)
Description