YASKAWA S-V Series User Manual page 240

Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO. SIEP C720829 02C <2>-1
Published in Japan September 2010
Date of Rev.
Publication No.
September 2021 <7>
August 2020 <6>
January 2020
January 2018
June 2016 <5>
October 2013
February 2012 <4>
January 2012 <3>
October 2010 <2>
September 2010
June 2010
WEB revision number
Revision number
Date of publication
WEB
Rev. Section
No.
0 All chapter Partly revised
2 5.4.1 Revision: Factory setting of Pn217
1 Preface Revision: Disposal Precautions
Back cover Revision: Address
0
All chapter Partly revised
Back cover Revision: Address
1 Front cover Revision: Format
4.2.1 (1), (2)
Revision: Title
4.2.2 (1), (2)
Revision: Sumitomo 3M Limited → 3M Japan Limited
4.3.2
Revision: Current Distributed Position Monitor → Position Reference Current Position
7.7.8, 10.5
10.1, 10.2 Revision: Information on reserved parameters
10.2 Revision: The setting range of Pn282
Back cover Revision: Address and format
Revision: Information for the addition of the Large-Capacity Σ-V Series.
0 All chapters
Back cover Revision: Address
0 Front cover,
Deletion: RoHS mark
1.1, 1.3, 2.1
5.4.1 (4) Revision: Figure for average movement time filter
6.5 Revision: Wave forms of /HOME and /DEC signals
Revision: Wave forms of /DEC and encoder phase-C signals in Function/Description of ZRN
7.7.2
7.7.3 Addition: PRMB53 in Positive Response of PRMppp serial command
7.7.8 Addition: Second note for IN1 serial command
10.1, 10.6 Addition: Parameter PnB53
0 – SIEP C720829 02C<2>-2, available on the Web.
Back cover Revision: Address
2 Front cover,
Revision: Format
back cover
2.3 Addition: Description of S1 and S2
4.2.3 Deletion: Earth symbol of CN8
9.2.1 Revision: Warning code output of A.A9F
10.1 Revision: Factory setting of PnB23
10.2 Revision: Description of Pn001.4
1 6.5 Addition: Restrictions on encoder use
10.2 Revision: Descriptions of the first digit of Pn000
Back cover Revision: Address
0 Addition: Information about the digital operator
All chapters
Revision: Slightly revised
6.1.10 (8) Addition: Information about the continuous stop function
Chapter 8 Addition: Entire chapter on the digital operator
Revised Content
serial command