YASKAWA S-V Series User Manual page 152

 ACC: Acceleration
Note: For details on the acceleration, refer to 6.1.4 (1) Program Table Functions.
 DEC: Deceleration
Note: For details on the deceleration, refer to 6.1.4 (1) Program Table Functions.
 POUT: Programmable Output Signals
Note: For details on the programmable output signal, refer to 6.1.4 (1) Program Table Functions.
 EVENT: Pass Condition
Change pass
condition
Change pass
condition
Change pass
condition
Change pass
condition
Change pass
condition
Change pass
condition
Change pass condition
Note: For details on the pass condition and elapsed time, refer to 6.1.4 (1) Program Table Functions.
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
Move cursor
8.2 Operation of Utility Functions
Change acceleration
If the value becomes less than 1,
":" is displayed.
Change deceleration
If the value becomes less than 1,
":" is displayed.
Change programmable output signal
Pressing the key changes the display
in the following order.
Pressing the key changes the display
in the reverse order.
Change elapsed time
Change elapsed time
Change elapsed time
Change elapsed time
Change elapsed time
Change elapsed time
Change elapsed time
8
8-9