Global Commands - YASKAWA S-V Series User Manual

7.4

Global Commands

Global commands are commands that are sent to all axes at the same time.
Command (Host controller → INDEXER Module)
"*" Command character string
Example: *SVON [CR]
*ST [CR]
*PUN [CR]
The axis number setting "*" is the global address and addresses all
axes.
No echoback or response is returned when the global address is
used.
When global commands are used, improve the communications reliability by reading the status when
appropriate.
Response (Host controller ← INDEXER Module)
Delimiter

7.4 Global Commands

No response returned.
7
7-5