YASKAWA S-V Series User Manual page 216

10 Appendix
Parameter
No.
Σ-V Series
Application Function Select Switch D
4th
digit
n.
Large-Capacity Σ-V Series
Application Function Select Switch D
Pn00D
4th
digit digit digit digit
n.    
Pn00F
Reserved (Do not change.)
Axis Address Selection
Pn010
(For UART/USB communications)
10-16
Name
3rd 2nd
1st
digit digit
digit
Stand-alone Mode (Test Operation) Selection
Enables connection with the command option module.
0
1 Disables connection with the command option module.
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
3rd 2nd 1st
Stand-alone Mode (Test Operation) Selection
0 Enables connection with the command option module.
1 Disables connection with the command option module.
Dynamic Brake Signal Selection
0 Enables the control of an NO contactor
(The dynamic brake is activated when current is supplied to the contactor coil.)
1
Enables the control of an NC contactor
(The dynamic brake is activated when current is not supplied to the contactor coil.)
Reserved (Do not change.)
Overtravel Warning Detection Selection
0 Does not detect overtravel warning.
1 Detects overtravel warning.
Setting Factory
Units
Range Setting
0000 and 0001 – 0000
−
0000 to 1011 0000
– – 0000
0000 to 007F – 0001
(cont'd)
When
Classification
Enabled
Immediately Setup
Immediately Setup
– –
After restart Setup