Jog Speed Table Edit/Save (Fnb05) - YASKAWA S-V Series User Manual

8 Operation of Digital Operator

8.2.4 JOG Speed Table Edit/Save (FnB05)

8.2.4 JOG Speed Table Edit/Save (FnB05)

This function edits and saves JOG speed tables. Saving a JOG speed table to flash memory after editing it
ensures that the data will be retained even after the control power has been turned off.
For details on how to read the screen, refer to 8.1.3 Reading the Screen.
(1) Preparation
The following conditions must be met to save and edit JOG speed tables.
• The write-prohibited setting (Fn010) must not be set to write-protect parameters.
• The JOG speed tables must not being saved by any other means than using the digital operator.
(2) Editing JOG Speed Tables
The operating procedure when setting the value for JOG speed table number 5 is explained here.
Step
1
2
3
4
5
6
7
∗
If setting is attempted in an operation prohibited state, it will not be possible to change the setting. In this case, make
the setting again by referring to (1) Preparation.
8-14
Display after Operation
Repeat steps 3 to 6 to set the JOG speed table. On completing the setting of all the JOG speed tables to be used,
save the JOG speed tables to flash memory by following the procedure in (3) Saving JOG Speed Tables.
Keys
Press the key to open the Utility Function Mode
main menu, and move the cursor with the
keys to select FnB05.
Press the key to view the FnB05 operation screen.
Move the cursor using the
JOG speed table number to be edited.
Note: Pressing the
speed table number 0 moves it to number 15.
Pressing the
speed table number 15 moves it to number 0.
Press the key to move the cursor to the setting side
of the table.
Move the cursor with the
JOG speed setting with the
On pressing the
cursor returns to the JOG speed table number side.
Operation
keys to select the
key when the cursor is on JOG
key when the cursor is on JOG
keys, and change the
*
keys.
key, the setting is entered and the