Serial Command
Program Table LOOP Write
Sets the LOOP value (number of repetitions).
LOOPTsss = nnnnn
sss: Program step (PGMSTEP)
Setting:
1 ≤ nnnnn ≤ 99999
Program Table NEXT Read
NEXTTsss
Reads the NEXT value (link destination).
sss: Program step (PGMSTEP)
Program Table NEXT Write
Sets the NEXT value (link destination).
sss: Program step (PGMSTEP)
NEXTTsss = nnn
Settings:
0 ≤ nnn ≤ 255: Program step (PGMSTEP)
END: End
Program Table Setup Commands (cont'd)
Function/Description
7.7 Serial Commands
Positive Response
OK
NEXTT123 = 12345 [CR] [LF]
NEXTT123 = END [SP] [SP] [CR] [LF]
OK
7
7-27