(3) Saving JOG Speed Tables
The operating procedure for saving JOG speed tables is shown below.
Step
Display after Operation
1
2
3
4
5
6
∗
If the
key is pressed in an operation prohibited state, "Error." is displayed for approximately 2 seconds and then
the display returns to the JOG speed table editing screen. In this case, make the setting again by referring to (1) Prepa-
ration.
Keys
–
Display the JOG speed table editing screen.
Press the
key to view the JOG speed table save
screen.
Move the cursor with the
"STORE".
Note: Selecting "CANCEL" and pressing the
will return the display to the JOG speed table
editing screen.
Press the
key to start saving the JOG speed table
*
to flash memory.
Do not turn off the control power supply until saving
has been completed normally.
When saving to flash memory has been completed nor-
–
mally, the display returns to the JOG speed table edit-
ing screen.
Press the
key to return to the Utility Function
Mode main menu.
8.2 Operation of Utility Functions
Operation
keys to select
key
8
8-15