YASKAWA S-V Series User Manual page 151

8 Operation of Digital Operator
8.2.2 Program Table Edit/Save (FnB03)
(3) Details on How to Set Table Settings
Details on the setting method for step 5 in 8.2.2 (2) Editing Program Table are shown below.
 POS: Target Position
Note: For details on the positioning type and target position, refer to 6.1.4 (1) Program Table Functions.
 SPD: Positioning Speed
Note: For details on the positioning speed, refer to 6.1.4 (1) Program Table Functions.
 RDST: Registration Distance
Note: For details on the registration distance, refer to 6.1.4 (1) Program Table Functions.
 RSPD: Registration Speed
Note: For details on the registration speed, refer to 6.1.4 (1) Program Table Functions.
8-8
Change positioning
Move cursor
type
Change positioning
Move cursor
type
Change positioning
type
Change positioning
type
Change positioning
type
Change positioning
Move cursor
type
Move cursor
Move cursor
Move cursor
Change target position
Change target position
Change target position
Change positioning speed
Change registration distance
If the value becomes less than 0,
"−" is displayed.
Change registration speed