Toyota AVENSIS 2000 Supplement Manual page 764

5 4
5 4
5 4 3 1
5 4 3 1
AVENSIS/CORONA SUP (RM781E)
AIR CONDITIONING
"DEF"
I19336
"FACE"
I19337
"FACE"
"DEF"
I19339
– AIR OUTLET SERVOMOTOR
3. RHD:
INSPECT AIR OUTLET SERVOMOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and negative (–) lead to terminal 4 and check that arm
turns to "DEF" side smoothly.
If operation is not as specified, replace the servomotor.
(b) Connect the positive (+) lead from the battery to terminal
4 and the negative (–) lead to terminal 5 and check that
the arm turns to "FACE" side smoothly.
If operation is not as specified, replace the servomotor.
4. RHD:
INSPECT AIR OUTLET POSITION SENSOR RESIS-
TANCE
Measure resistance between terminals at servomotor arm each
position as shown in the chart.
Tester connection
2 – 1
3 – 1
3 – 1
If resistance is not as specified, replace the servomotor.
Condition
Constant
Arm position at "DEF"
Arm position at "FACE"
AC–25
Specified condition
4.2 – 7.8 kΩ
3.49 – 6.47 kΩ
0.71 – 1.33 kΩ