Toyota AVENSIS 2000 Supplement Manual page 19

IN–14
Example:
Correct
H11622 H12060
Example:
H12059 R06952
AVENSIS/CORONA SUP (RM781E)
INTRODUCTION
(g)
NOTICE:
Protection bag is not reuse.
CAUTION:
Never disassemble the curtain shield airbag assembly.
Clear Plastic Bag
– FOR ALL OF VEHICLES
CURTAIN SHIELD AIRBAG ASSEMBLY
(1) Always store a removed or new curtain shield air-
bag assembly in a clear plastic bag, and keep it in
a safe place.
(2) Never measure the resistance of the airbag squib
(This may cause the airbag to deploy, which is very
dangerous.).
(3) Grease should not be applied to the curtain shield
airbag assembly and the surface should not be
cleaned with detergents of any kind.
(4) Store the airbag assembly where the ambient tem-
perature remains below 93°C (200°F), without high
humidity and away from electrical noise.
(5) When using electric welding, first disconnect the air-
bag connector (yellow color and 2 pins) into the
instrument panel before starting work.
(6) When disposing of a vehicle or the curtain shield air-
bag assembly alone, the airbag should be deployed
using an SST before disposal (See Pub. No.
RM698E, page RS–26).
Perform the operation in a safe place away from
electrical noise.
Wrong
B08604
B08605