DI–158
4
Check voltage between terminals IG1 and GND of ABS actuator connector.
ON
IG1
(+)
(–)
OK
5
Check connection of ABS actuator connector.
CHECK:
(a)
Check the connection of the ABS actuator connector.
(b)
Check the ABS warning light goes off.
NG
Repair or replace harness or connector.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
PREPARATION:
Disconnect ABS actuator connector.
CHECK:
(a)
(b)
OK:
GND
F00067
YES
OK
–
ANTI–LOCK BRAKE SYSTEM WITH ELECTRONIC
BRAKE FORCE DISTRIBUTION (EBD)
Turn the ignition switch ON.
Measure voltage between terminals IG1 and GND of ABS
actuator harness side connector.
Voltage: 10 – 14 V
Check for open or short circuit in harness and
connector between ECU–IG fuse and ABS ac-
tuator (See page IN–30).
Check and replace ABS ECU.