DI–160
INSPECTION PROCEDURE
Troubleshoot in accordance with the chart below for each trouble symptom.
ABS warning light does not light up
ABS warning light remains ON
1
Check ABS warning light.
See combination meter troubleshooting (See Pub. No. RM599E on page BE–57).
OK
Check for open circuit in harness and connector between GAUGE fuse and ABS ECU (See page
IN–30).
2
Is DTC output?
Check DTC on page DI–129.
NO
Check for short circuit in harness and connector between ABS warning light, DLC3 and ECU (See
page IN–30).
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
–
ANTI–LOCK BRAKE SYSTEM WITH ELECTRONIC
BRAKE FORCE DISTRIBUTION (EBD)
NG
Repair bulb or combination meter assembly.
YES
Repair circuit indicated by the output code.
Go to step 1
Go to step 2