Toyota AVENSIS 2000 Supplement Manual page 407

CL–2
25 mm (0.98 in) or more
Full Stroke
End Position
AVENSIS/CORONA SUP (RM781E)
CLUTCH –
5. CHECK CLUTCH RELEASE POINT
(a) Pull the parking brake lever and install wheel stopper.
(b) Start the engine and idle the engine.
(c) Without depressing the clutch pedal, slowly shift the shift
Release
lever into reverse position until the gears make contact.
Point
(d) Gradually depress the clutch pedal and measure the
stroke distance from the point the gear noise stops (re-
lease point) to the full stroke end position.
Standard distance:
CL0512
25 mm (0.98 in.) or more
(From pedal stroke end position to release point)
If the distance is not as specified, perform the following opera-
tions.
S
S
S
S
CLUTCH PEDAL
Inspect pedal height.
Inspect push rod play and pedal freeplay.
Bleed the clutch line.
Inspect the clutch cover and disc.