Toyota AVENSIS 2000 Supplement Manual page 10

Medium Current Fuse and High Current Fuse
Equal Amperage Rating
Illustration
AVENSIS/CORONA SUP (RM781E)
INTRODUCTION – REPAIR INSTRUCTIONS
(h) Carefully observe all specifications for bolt tightening
torques. Always use a torque wrench.
(i) Use of special service tools (SST) and special service ma-
terials (SSM) may be required, depending on the nature
of the repair. Be sure to use SST and SSM where speci-
fied and follow the proper work procedure. A list of SST
and SSM can be found in Preparation section in this
manual.
(j) When replacing fuses, be sure the new fuse has the cor-
rect amperage rating. DO NOT exceed the rating or use
one with a lower rating.
BE1367
Symbol
(k) Care must be taken when jacking up and supporting the
vehicle. Be sure to lift and support the vehicle at the prop-
er locations (See page IN–7).
(1) If the vehicle is to be jacked up only at the front or
rear end, make sure to place the stopper under the
wheels at the opposite end to block them in order to
ensure safety.
Part Name
FUSE
MEDIUM CURRENT FUSE
HIGH CURRENT FUSE
FUSIBLE LINK
CIRCUIT BREAKER
IN–5
Abbreviation
FUSE
M–FUSE
H–FUSE
FL
CB
V00076