Toyota AVENSIS 2000 Supplement Manual page 217

DI–86
INSPECTION PROCEDURE
1 Check ATF temperature sensor.
OK
2 Check harness and connector between ATF temperature sensor and Engine and
ECT ECU (See page IN–30).
OK
Check and replace the Engine and ECT ECU
(See page IN–30).
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
6
1
D02967
– AUTOMATIC TRANSAXLE (U240E)
PREPARATION:
(a) Disconnect the solenoid wire connector.
(b) Remove the oil pan.
(c) Disconnect all solenoid valve connectors.
(d) Remove the transmission wire harness.
CHECK:
Measure resistance between terminals 1 and 6 of solenoid con-
nector at 25 °C (77 °F) and 110 °C (230 °F).
OK:
Resistance (Approx.):
25 °C (77 °F): 3.5 kΩ
110 °C (230 °F): 231 – 263 Ω
NG Replace the ATF temperature sensor (transaxle
wire).
NG Repair or replace the harness or connector.