Toyota AVENSIS 2000 Supplement Manual page 500

AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (E351)
7.
Using a press, remove the No.1 hub sleeve and 1st gear.
8.
Z00222
9.
Using SST and a press, remove the 1st gear bearing inner race.
SST
Q06202
10.
Using SST, remove the output shaft front bearing.
SST
Q00296
– OUTPUT SHAFT
REMOVE NO.1 HUB SLEEVE ASSEMBLY AND 1ST
GEAR
REMOVE SYNCHRONIZER RING AND NEEDLE
ROLLER BEARING
REMOVE 1ST GEAR BEARING INNER RACE
SST 09950–00020
REMOVE OUTPUT SHAFT FRONT BEARING
SST 09950–00020, 09950–00030
MX–31