Toyota AVENSIS 2000 Supplement Manual page 229

DI–98
INSPECTION PROCEDURE
1 Check harness and connector between Engine and ECT ECU and automatic
transaxle solenoid connector.
DSL
OK
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS –
PREPARATION:
(a) Disconnect the solenoid connector from the transaxle.
(b) Disconnect the connector from the Engine and ECT ECU.
CHECK:
Measure the harness and connector between terminal DSL of
Engine and ECT ECU and terminal DSL of solenoid connector.
DSL
OK:
There is continuity.
D10031
NG
AUTOMATIC TRANSAXLE (U240E)
Repair or replace the harness or connector.