AVENSIS/CORONA SUP (RM781E)
STEERING
–
POWER STEERING VANE PUMP (1ZZ–FE, 3ZZ–FE)
8.
INSTALL OIL PRESSURE SWITCH
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
9.
INSTALL SPRING, FLOW CONTROL VALVE AND
PRESSURE PORT UNION
(a)
Install the spring.
(b)
Install the flow control valve facing in the correct direction
(See page SR–8).
(c)
Coat a new O–ring with power steering fluid, and install
it to the pressure port union.
(d)
Install the pressure port union.
Torque: 69 N·m (700 kgf·cm, 51 ft·lbf)
10.
INSTALL SUCTION PORT UNION
(a)
Coat a new O–ring with power steering fluid, and install
it to the suction port union.
(b)
Install the suction port union with the bolt.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
11.
MEASURE PS VANE PUMP ROTATING TORQUE (See
page SR–11)
SR–17