Toyota AVENSIS 2000 Supplement Manual page 593

AX–32
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (A246E)
INSTALLATION
1.
Using calipers and a straight edge, measure the distance be-
tween the installed surface and the front surface of the trans-
axle housing.
2.
Installation is in the reverse order of removal (See page
AX–29).
F00502
HINT:
– AUTOMATIC TRANSAXLE UNIT
CHECK TORQUE CONVERTER INSTALLATION
Correct distance: More than 15.5 mm (0.610 in.)
TRANSAXLE INSTALLATION
S
After installation, adjust the shift control cable and neutral
start switch (See page DI–3).
S
Fill ATF and check fluid level (See page DI–3).
S
Perform the test drive of the vehicle (See page DI–3).
AX031–05