Toyota AVENSIS 2000 Supplement Manual page 528

Remove
SST
SST
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (S54, S55)
Q02530
Install
Q05696
Q05200
SST
Z00455
Q02695
– MANUAL TRANSAXLE ASSEMBLY
9. REMOVE OUTPUT SHAFT LOCK NUT
(a) Unstake the nut.
(b) Engage the gear to the double meshing, with the gear into
1st and 3rd or 2nd and 4th.
(c) Remove the lock nut clockwise and remove it.
Torque: 123 N·m (1,250 kgf·cm, 90 ft·lbf)
HINT:
The lock nut has LH threads.
(d) Disengage the double meshing of the gear.
10. REMOVE NO.3 HUB SLEEVE AND NO.3 SHIFT FORK
(a) Remove the No.3 shift fork set bolt.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
(b) Remove the No.3 hub sleeve and No.3 shift fork.
11. REMOVE 5TH DRIVEN GEAR
Using SST, remove the 5th driven gear.
SST 09950–40011
HINT:
At the time of installation, please refer to the following item.
Using SST, install the 5th driven gear.
SST 09309–12020
12. MEASURE 5TH GEAR THRUST CLEARANCE
Using a dial indicator, measure the thrust clearance.
Maximum clearance:
0.57 mm (0.0224 in.)
Minimum clearance:
0.10 mm (0.0039 in.)
MX–11