Toyota AVENSIS 2000 Supplement Manual page 18

Example:
Example:
AVENSIS/CORONA SUP (RM781E)
INTRODUCTION
(f)
Correct
– FOR ALL OF VEHICLES
SIDE AIRBAG ASSEMBLY
(1) Always store a removed or new side airbag assem-
bly with the airbag deployment direction facing up.
Storing the airbag assembly with the airbag deploy-
ment direction facing down could cause a serious
accident if the airbag inflates.
(2) Never measure the resistance of the airbag squib.
(This may cause the airbag to deploy, which is very
dangerous.)
(3) Grease should not be applied to the side airbag as-
sembly and the surface should not be cleaned with
detergents of any kind.
(4) Store the airbag assembly where the ambient tem-
perature remains below 93°C (200°F), without high
humidity and away from electrical noise.
(5) When using electric welding, first disconnect the air-
bag connector (yellow color and 2 pins) under the
seat before starting work.
(6) When disposing of a vehicle or the side airbag as-
sembly alone, the airbag should be deployed using
an SST before disposal (See Pub. No. RM698E,
page RS–12).
Perform the operation in a safe place away from
electrical noise.
Wrong
IN–13
B02129
B01546