Toyota AVENSIS 2000 Supplement Manual page 632

A
B
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (U240E)
D09914
D09915
C
A
D02064
D02523
– AUTOMATIC TRANSAXLE UNIT
10. DISCONNECT SHIFT CONTROL CABLE
Remove the nut, clip and disconnect the shift control cable.
Torque: 12 N·m (120 kgf·cm, 9 ft·lbf)
11. DISCONNECT NEUTRAL START SWITCH CONNEC-
TOR AND SOLENOID CONNECTOR
12. DISCONNECT VEHICLE SPEED SENSOR CONNEC-
TOR
13. REMOVE EXHAUST FRONT PIPE
(a) Disconnect the oxygen sensor connector.
(b) Remove the 2 nuts from the exhaust manifold.
Torque: 62 N·m (630 kgf·cm, 46 ft·lbf)
HINT:
At the time of installation, please refer to the following item.
Replace the used nuts with new ones.
(c) Remove the 2 bolts, nuts and exhaust front pipe with 2
gaskets.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
HINT:
At the time of installation, please refer to the following item.
Replace the used nuts with new ones.
(d) Remove the 2 gaskets from the exhaust front pipe.
HINT:
At the time of installation, please refer to the following item.
Replace the used gaskets with new ones.
14. REMOVE FRONT CENTER MEMBER
(a) RHD:
Remove the nut and disconnect the suction hose from the
front center member.
(b) Remove the 9 bolts, 3 grommets, front center member
protector and front center member.
Torque:
A: 73 N·m (740 kgf·cm, 54 ft·lbf)
B: 39 N·m (400 kgf·cm, 29 ft·lbf)
C: 72 N·m (740 kgf·cm, 53 ft·lbf)
15. DISCONNECT OIL COOLER HOSES
AX–35