Toyota AVENSIS 2000 Supplement Manual page 558

SST
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (S54, S55)
(g)
If the preload is not within the specification, remove the trans-
mission case side bearing retainer. Select another shim.
HINT:
The preload will change by approx. 0.3–0.4 N·m (3–4 kgf·cm,
2.6–3.5 in.·lbf) corresponding to a change of 0.05 mm in shim
Z00620
thickness.
(h)
(i)
(j)
(k)
– DIFFERENTIAL CASE
Using SST and a torque wrench, measure the preload.
SST 09564–32011
Preload (at starting):
1.0–1.6 N·m (10–16 kgf·cm, 8.7–13.9 in.·lbf)
Mark Thickness mm (in.)
1 1.90 (0.0748)
2 1.95 (0.0768)
3 2.00 (0.0787)
4 2.05 (0.0807)
5 2.10 (0.0827)
6 2.15 (0.0846)
7 2.20 (0.0866)
8 2.25 (0.0886)
9 2.30 (0.0906)
10 2.35 (0.0925)
Remove the 6 bolts.
Remove the bearing retainer and shim.
Remove the 17 bolts.
Remove the transmission case.
Mark Thickness mm (in.)
11 2.40 (0.0945)
12 2.45 (0.0965)
13 2.50 (0.0984)
14 2.55 (0.1004)
15 2.60 (0.1024)
16 2.65 (0.1043)
17 2.70 (0.1063)
18 2.75 (0.1083)
19 2.80 (0.1102)
– –
MX–41