Toyota AVENSIS 2000 Supplement Manual page 287

DI–156
2 Check voltage between terminal STP of ABS actuator and body ground.
(–) (+)
STP
NG
3 Check for open circuit in harness and connector between ABS ECU and stop
light switch (See page IN–30).
OK
Check and replace ABS ECU.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS – ANTI–LOCK BRAKE SYSTEM WITH ELECTRONIC
BRAKE FORCE DISTRIBUTION (EBD)
PREPARATION:
Disconnect ABS actuator connector.
CHECK:
Measure voltage between terminal STP of ABS actuator har-
ness side connector and body ground when brake pedal is de-
pressed.
OK:
Voltage: 8 – 14 V
F00069
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI–135).
NG Repair or replace harness or connector.