Toyota AVENSIS 2000 Supplement Manual page 680

AVENSIS/CORONA SUP (RM781E)
STEERING
REMOVAL
1.
Remove the 5 bolts and engine under cover RH.
2.
Using SST, loosen the drive belt tension by turning the drive belt
tensioner arm clockwise, and remove the drive belt.
SST
F13071
3.
Remove the clip and disconnect the suction hose.
NOTICE:
Take care not to spill fluid on the drive belt.
4.
Remove the union bolt, gasket and pressure feed tube.
5.
Loosen the 2 bolts and PS vane pump assembly.
F13070
– POWER STEERING VANE PUMP (1AZ–FSE)
REMOVE ENGINE UNDER COVER RH
REMOVE DRIVE BELT
SST 09249–63010
DISCONNECT SUCTION HOSE
REMOVE PRESSURE FEED TUBE
REMOVE PS VANE PUMP ASSEMBLY
SR–21
SR1C8–01