Toyota AVENSIS 2000 Supplement Manual page 435

MX–14
AVENSIS/CORONA SUP (RM781E)
MANUAL TRANSAXLE (C50, C250)
13.
Using a dial indicator, measure the thrust clearance.
Q02519
14.
Using a dial indicator, measure the radial clearance.
Z00658
If the clearance exceeds the maximum, replace the gear,
needle roller bearing or shaft.
15.
(a)
HINT:
At the time of reassembly, please refer to the following item.
Select a snap ring that allows the minimum axial play.
Z00659
(b)
– MANUAL TRANSAXLE ASSEMBLY
INSPECT 5TH GEAR THRUST CLEARANCE
Standard clearance:
0.10–0.57 mm (0.0039–0.0024 in.)
Maximum clearance:
0.57 mm (0.0224 in.)
INSPECT 5TH GEAR RADIAL CLEARANCE
Standard clearance:
KOYO made:
0.015–0.058 mm (0.0006–0.0023 in.)
NSK made:
0.015–0.056 mm (0.0006–0.0022 in.)
Maximum clearance:
KOYO made:0.058 mm (0.0023 in.)
NSK made:0.056 mm (0.0022 in.)
REMOVE NO.3 CLUTCH HUB AND 5TH GEAR
Using 2 screwdrivers and a hammer, tap out the snap
ring.
Mark Thickness mm (in.)
A 2.25 (0.0886)
B 2.31 (0.0909)
C 2.37 (0.0933)
D 2.43 (0.0957)
Using a screwdriver, remove the key spring.
Mark Thickness mm (in.)
E 2.49 (0.0980)
F 2.55 (0.1004)
G 2.61 (0.1028)
– –