BE–8
UNLOCK
LOCK
UNLOCK
LOCK
AVENSIS/CORONA SUP (RM781E)
BODY ELECTRICAL
7.
w/ Double locking system:
1
INSPECT PASSENGER'S DOOR PTC THERMISTOR
OPERATION
(a)
Connect the negative (–) lead from the battery to terminal
1.
(b)
Connect the negative (–) lead from the ammeter to termi-
nal 2 and the positive (+) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
I19368
(c)
Disconnect the leads from terminals.
1
2
(d)
Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 1 and the negative (–)
lead to terminal 2, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
I19369
8.
w/ Double locking system:
2
1
INSPECT PASSENGER'S DOOR PTC THERMISTOR
OPERATION
(a)
Connect the positive (+) lead from the battery to terminal
2 and the negative (–) lead to terminal 1.
(b)
Attach a current–measuring probe to either the positive
(+) lead or the negative (–) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.
I19370
(c)
Disconnect the leads from terminals.
2
1
(d)
Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
I19369
–
POWER DOOR LOCK CONTROL SYSTEM