Toyota AVENSIS 2000 Supplement Manual page 633

AX–36
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (U240E)
16.
D02524
17.
D10022
18.
Remove the 3 bolts and engine rear mounting bracket.
D02044
19.
(a)
HINT:
At the time of installation, please refer to the following item.
First, install the gray bolt. Then install 5 black bolts.
(b)
D10023
(c)
HINT:
At the time of installation, please refer to the following item.
Temporarily tighten the transaxle mounting bolts.
– AUTOMATIC TRANSAXLE UNIT
SUPPORT TRANSAXLE
REMOVE ENGINE REAR MOUNTING BOLT
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
REMOVE ENGINE REAR MOUNTING BRACKET
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
REMOVE TRANSAXLE
Turn the crankshaft to gain access and remove the 6 bolts
with holding the crankshaft pulley bolt by a wrench.
Torque: 41 N·m (420 kgf·cm, 30 ft·lbf)
Remove the 4 bolts.
Torque: 46 N·m (470 kgf·cm, 34 ft·lbf)
Lower the left side of the engine and remove the transaxle
from the engine.