Toyota AVENSIS 2000 Supplement Manual page 242

INSPECTION PROCEDURE
1 Check SLT solenoid valve.
2
2
D03445
D03446
D02968
OK
2 Check harness and connector between SLT solenoid valve and Engine and ECT
ECU (See page IN–30).
OK
Replace Engine and ECT ECU.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
PREPARATION:
1
(a)
(b)
(c)
Check Solenoid Resistance:
CHECK:
Measure resistance between terminals 1 and 2 of solenoid con-
1
nector.
OK:
Check Solenoid Operation:
CHECK:
Connect positive (+) lead with an 8 – 10W bulb to terminal 1 of
solenoid connector and negative (–) lead to terminal 2, then
check the movement of the valve.
OK:
When battery positive voltage is applied.
D03729
When battery positive voltage is cut off.
– AUTOMATIC TRANSAXLE (U240E)
Jack up the vehicle.
Remove the oil pan.
Disconnect the solenoid connector.
Resistance: 5.0 – 5.6 Ω at 20 °C (68 °F)
NG Replace SLT solenoid valve.
NG Repair or replace harness or connector.
Valve moves in
in illustration at right.
Valve moves in
in illustration at left.
DI–111
direction
direction