Toyota AVENSIS 2000 Supplement Manual page 270

INSPECTION PROCEDURE
1 Check voltage between terminals A6 – 17, 18 and A6 – 16, 19 of ABS actuator
connector.
LOCK LOCK LOCK
A6
19 18
OK
If the same code is still output after the DTC is deleted, check the contact condition of each con-
nection. If the connections are normal, the ECU may be defective.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS
PREPARATION:
Disconnect the ABS actuator connector.
CHECK:
17
Measure the voltage between terminals A6 – 17, 18 and A6 –
(–) (–) (–)
16, 19 of ABS actuator harness side connector.
OK:
(+) (+) (+)
16
F00064
– ANTI–LOCK BRAKE SYSTEM WITH ELECTRONIC
BRAKE FORCE DISTRIBUTION (EBD)
Voltage: 10 – 14 V
NG Check and replace fuses.
Check and repair harness or connector.
DI–139