AVENSIS/CORONA SUP (RM781E)
AIR CONDITIONING
–
COMPRESSOR AND MAGNETIC CLUTCH
REMOVAL
1.
RUN ENGINE AT IDLE SPEED WITH A/C ON FOR
APPROX. 10 MINUTES
2.
STOP ENGINE
3.
DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
4.
DISCHARGE REFRIGERANT FROM REFRIGERATION
SYSTEM
5.
REMOVE ENGINE UNDER COVER RH
6.
REMOVE DRIVE BELT (See page AC–3)
7.
DISCONNECT DISCHARGE AND SUCTION HOSES
Remove the 2 bolts and disconnect the both hoses.
NOTICE:
Cap the open fittings immediately to keep moisture or dirt
out of the system.
I12999
8.
1ZZ–FE, 3ZZ–FE Engines:
REMOVE COMPRESSOR
(a)
Disconnect the connector.
(b)
Disconnect the wire harness clamp.
(c)
Remove the 3 bolts and compressor.
I13000
9.
1AZ–FSE Engine:
REMOVE COMPRESSOR
(a)
Disconnect the connector.
(b)
Disconnect the wire harness clamp.
(c)
Remove the 4 bolts and compressor.
AC–13
AC2IP–02