Toyota AVENSIS 2000 Supplement Manual page 183

DI–52
4 Check harness and connector between O/D OFF indicator light and Engine and
ECT ECU (See page IN–30).
OK
Repair or replace the wire harness or con-
nectors between the connector of Engine
and ECT ECU and the body ground.
AVENSIS/CORONA SUP (RM781E)
DIAGNOSTICS – AUTOMATIC TRANSAXLE (A246E)
PREPARATION:
Disconnect the connector (E6) of Engine and ECT ECU and the
connector (C14) of the combination meter.
CHECK:
Measure the continuity between the connector (E6) of Engine
and ECT ECU and the connector (C14) of the combination me-
ter.
OK:
Continuity
NG Repair or replace the harness or connector.