Toyota AVENSIS 2000 Supplement Manual page 575

AX–14
3
1
Secondary Locking Device
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (A246E)
DISASSEMBLY
1.
(a)
(b)
(c)
2
A00451
2.
(a)
NOTICE:
Pay attention not to put unnatural load onto O/D main
switch wire harness.
(b)
(c)
(d)
3.
4.
5.
Remove the screws and an indicator housing.
6.
(a)
(b)
(c)
(d)
(e)
D08694
7.
Remove the 2 screws and shift lock control computer.
8.
– FLOOR SHIFT ASSEMBLY (LHD)
REMOVE O/D MAIN SWITCH TERMINAL
Remove the O/D main switch connector from the shift le-
ver plate.
Disengage the secondary locking device.
Release the locking lug of the terminals 2 and 4, and pull
the terminals out from the rear.
REMOVE SHIFT LEVER KNOB SUB–ASSEMBLY
Remove the 2 screws and shift lever knob sub–assembly.
Remove the shift lever knob cover.
Remove the shift lever button and spring.
Remove the O/D main switch.
REMOVE INDICATOR LIGHT WIRE
REMOVE CAP AND BULB FROM INDICATOR LIGHT
WIRE
REMOVE INDICATOR HOUSING
DISASSEMBLE INDICATOR HOUSING
Remove the pattern select switch.
Remove the position indicator lower housing.
Remove the shift lock release button and spring.
Remove the position indicator slide cover.
Remove the position indicator plate.
REMOVE SHIFT LOCK CONTROL COMPUTER
REMOVE SPRING PLATE
AX0C5–03