Toyota AVENSIS 2000 Supplement Manual page 625

AX–28
3
1
Secondary Locking Device
AVENSIS/CORONA SUP (RM781E)
AUTOMATIC TRANSAXLE (U240E)
DISASSEMBLY
1.
(a)
(b)
(c)
2
2.
(a)
A00451
NOTICE:
Pay attention not to apply unnatural load onto O/D main
switch wire harness.
(b)
(c)
(d)
3.
4.
5.
6.
(a)
(b)
(c)
D02094
7.
Remove the 3 screws and shift lock control computer.
D09908
8.
– FLOOR SHIFT ASSEMBLY (RHD)
REMOVE O/D MAIN SWITCH TERMINAL
Remove O/D main switch connector from the shift lever
plate.
Disengage the secondary locking device.
Disengage the locking lug of the terminals 2 and 4, and
pull the terminals out from the rear.
REMOVE SHIFT LEVER KNOB SUB–ASSEMBLY
Remove the 2 screws and shift lever knob sub–assembly.
Remove the Shift lever knob cover.
Remove the Shift lever button and spring.
Remove the O/D main switch.
REMOVE INDICATOR LIGHT WIRE
REMOVE BULB FROM INDICATOR LIGHT WIRE
REMOVE INDICATOR HOUSING SUB–ASSEMBLY
DISASSEMBLE INDICATOR HOUSING SUB–AS-
SEMBLY
Remove the position indicator side cover.
Remove the position indicator plate.
Remove the pattern select switch.
REMOVE SHIFT LOCK CONTROL COMPUTER
REMOVE STOPPER PIN, DETENT ROD AND SPRING
AX110–01