TROUBLESHOOTING
1.
DISPLAYING RESULTS
Results for each check are displayed as follows:
S
GOOD:
No DTC is detected for both "System Check Confirmation" and "Diagnosis Memory Response".
S
NCON:
The Component does not respond to the "Diagnosis On Instruction" command.
Applicable to only the system where connected components are limited to be used.
S
ECHN:
Application of new version has been confirmed by the "Diagnosis On Check", and there is one
or more DTC which indicates "Replacement" in the "System Check Result Response" or "Diagno-
sis Memory Response".
S
CHEC:
Application of new version has been confirmed by the "Diagnosis On Check", and there is no DTC
which indicates "Replacement" in the "System Check Result Response" or "Diagnosis Memory
Response", but one or more DTC which indicated "Check" is identified.
S
OLD:
Application of old version is confirmed by the "Diagnosis On Check", and DTC is identified in the
"System Check Result Response" or "Diagnosis Memory Response".
S
NRES:
No response is identified to the "System Check Start Instruction" and "Request for System Check
Result" commands.
Example:
TUNE DOWN
AVENSIS/CORONA SUP (RM781E)
BODY ELECTRICAL
"1" Switch
"2" Switch
–
AUDIO SYSTEM
TUNE UP
"3" Switch
"5" Switch
TAPESCD
"6" Switch
BE–19
BE1XT–01
I18196